{"id":127,"date":"2025-04-07T01:34:28","date_gmt":"2025-04-07T01:34:28","guid":{"rendered":"https:\/\/y8fcm07rsq.wpdns.site\/?p=127"},"modified":"2025-12-03T07:07:56","modified_gmt":"2025-12-03T07:07:56","slug":"kundenspezifischer-pp-dreiphasentrenner","status":"publish","type":"post","link":"https:\/\/shengliangplastic.com\/de\/kundenspezifischer-pp-dreiphasentrenner\/","title":{"rendered":"Kundenspezifischer PP-Dreiphasenabscheider - Effiziente Fest-Fl\u00fcssig-Gas-Trennung f\u00fcr die Abwasserreinigung"},"content":{"rendered":"<h2 class=\"wp-block-heading\">1. Produkt\u00fcbersicht<\/h2>\n<p><strong>PP-Drehstromtrenner<\/strong> werden in der Regel im oberen Teil von anaeroben Reaktoren installiert. Durch die Kombination von Umlenkplatten, Gassammelkammern und Absetzzonen trennen sie aufsteigende Gas-Fl\u00fcssigkeits-Feststoff-Gemische in drei verschiedene Phasen:<\/p>\n<ul class=\"wp-block-list\">\n<li><strong>Gas:<\/strong> Das Biogas wird gesammelt und in das Gasleitungssystem geleitet, ohne dass die Absetzzone gest\u00f6rt wird.<\/li>\n<li><strong>Solide:<\/strong> Die Schlammpartikel setzen sich am Boden des Reaktors ab, so dass eine ausreichende Schlammkonzentration erhalten bleibt.<\/li>\n<li><strong>Fl\u00fcssig:<\/strong> Das gekl\u00e4rte Wasser flie\u00dft \u00fcber Wehre zu den nachgeschalteten Behandlungsstufen.<\/li>\n<\/ul>\n<p>Der Separator wird hergestellt aus <strong>geschwei\u00dfte PP-Platten und Profile<\/strong>, und bietet geringes Gewicht, hohe Korrosionsbest\u00e4ndigkeit und einfache Montage vor Ort. Die Module k\u00f6nnen im Werk vormontiert und dann an ihren Platz gehoben oder je nach Projektbedingungen im Tank verschwei\u00dft werden.<\/p>\n<hr class=\"wp-block-separator has-alpha-channel-opacity\" \/>\n<h2 class=\"wp-block-heading\">2. Arbeitsprinzip<\/h2>\n<ul class=\"wp-block-list\">\n<li><strong>Aufw\u00e4rtsstr\u00f6mung und Vermischung:<\/strong> Das mit Schlamm vermischte Abwasser steigt vom Boden des Reaktors auf, da bei der anaeroben Verg\u00e4rung Biogas entsteht.<\/li>\n<li><strong>Aufprall auf Ablenkplatten:<\/strong> Gas-Fl\u00fcssigkeits-Feststoff-Gemische treffen auf die PP-Leitbleche im Dreiphasenabscheider. Die Gasblasen \u00e4ndern ihre Richtung und trennen sich von Schlamm und Fl\u00fcssigkeit.<\/li>\n<li><strong>Gassammlung:<\/strong> Das freigesetzte Gas tritt in die Gassammelkammer ein und wird durch Gasleitungen abgeleitet, um den Reaktordruck stabil zu halten.<\/li>\n<li><strong>R\u00fcckf\u00fchrung des Schlamms:<\/strong> Schwerere Schlammpartikel gleiten an den geneigten Platten oder W\u00e4nden entlang und setzen sich wieder im Schlammbett ab, wodurch der Verlust aktiver Biomasse verhindert wird.<\/li>\n<li><strong>Fl\u00fcssige Kl\u00e4rung:<\/strong> Die Fl\u00fcssigkeit flie\u00dft weiter in die Absetzzone, wo die verbleibenden Schwebstoffe weiter abgeschieden werden, bevor das gekl\u00e4rte Wasser in den Abwasserkanal \u00fcberl\u00e4uft.<\/li>\n<\/ul>\n<p>Durch die Aufrechterhaltung einer stabilen Trennschicht tr\u00e4gt der PP-Dreiphasen-Separator dazu bei, dass <strong>hohe Biomasser\u00fcckhaltung, stabile CSB-Entfernung und effiziente Biogasgewinnung<\/strong>.<\/p>\n<hr class=\"wp-block-separator has-alpha-channel-opacity\" \/>\n<h2 class=\"wp-block-heading\">3. Hauptmerkmale und Vorteile<\/h2>\n<h3 class=\"wp-block-heading\">Korrosionsbest\u00e4ndigkeit und Lebensdauer<\/h3>\n<ul class=\"wp-block-list\">\n<li><strong>Chemische Best\u00e4ndigkeit:<\/strong> Das PP-Material vertr\u00e4gt einen weiten pH-Bereich, der typischerweise bei der anaeroben Abwasserbehandlung auftritt.<\/li>\n<li><strong>Lange Nutzungsdauer:<\/strong> Kein Rosten oder Abbl\u00e4ttern der Beschichtung wie bei Metallkonstruktionen, was die Wartungsh\u00e4ufigkeit verringert.<\/li>\n<li><strong>Bewuchsarme Oberfl\u00e4che:<\/strong> Glatte PP-Oberfl\u00e4chen verringern die Ablagerungen und lassen sich bei regelm\u00e4\u00dfiger Reinigung leichter abwaschen.<\/li>\n<\/ul>\n<h3 class=\"wp-block-heading\">Mechanische und strukturelle Leistung<\/h3>\n<ul class=\"wp-block-list\">\n<li><strong>Leichte Konstruktion:<\/strong> Geringeres Eigengewicht im Vergleich zu Stahleinbauten, was das Anheben und den Einbau vereinfacht.<\/li>\n<li><strong>Verst\u00e4rkte Konstruktion:<\/strong> Je nach Tankgr\u00f6\u00dfe und hydraulischer Belastung k\u00f6nnen Innenrippen und Versteifungen hinzugef\u00fcgt werden.<\/li>\n<li><strong>Modularer Aufbau:<\/strong> Die Separatormodule k\u00f6nnen in Abschnitten transportiert und im Reaktor zusammengeschwei\u00dft werden, wenn der Zugang beschr\u00e4nkt ist.<\/li>\n<\/ul>\n<h3 class=\"wp-block-heading\">Prozessleistung<\/h3>\n<ul class=\"wp-block-list\">\n<li><strong>Hohe Schlammr\u00fcckhaltung:<\/strong> Verringert die Auswaschung von aktiver Biomasse und unterst\u00fctzt h\u00f6here volumetrische Beladungsraten.<\/li>\n<li><strong>Verbesserte Qualit\u00e4t des Abwassers:<\/strong> Durch die verbesserte Fest-Fl\u00fcssig-Trennung werden die suspendierten Feststoffe im Endabfluss des Reaktors reduziert.<\/li>\n<li><strong>Stabile Gassammlung:<\/strong> Eine wirksame Gas-Fl\u00fcssig-Trennung tr\u00e4gt zur Stabilisierung des Reaktordrucks bei und sch\u00fctzt die nachgeschalteten Gasanlagen.<\/li>\n<\/ul>\n<hr class=\"wp-block-separator has-alpha-channel-opacity\" \/>\n<h2 class=\"wp-block-heading\">4. Typische Anwendungen<\/h2>\n<ul class=\"wp-block-list\">\n<li><strong>UASB-Reaktoren:<\/strong> Upflow Anaerobic Sludge Blanket Reaktoren f\u00fcr hochbelastete Industrieabw\u00e4sser.<\/li>\n<li><strong>EGSB-Reaktoren:<\/strong> Expanded Granular Sludge Bed Reaktoren mit h\u00f6heren Aufstromgeschwindigkeiten und Beladungsraten.<\/li>\n<li><strong>IC-Reaktoren und \u00e4hnliche Konstruktionen:<\/strong> Anaerobe Reaktoren mit internem Kreislauf, die in kompakten Kl\u00e4ranlagen mit hohem Durchsatz eingesetzt werden.<\/li>\n<li><strong>Nachr\u00fcstung von bestehenden Tanks:<\/strong> Nachr\u00fcstung \u00e4lterer Reaktoren oder Tanks durch den Einbau von PP-Drehstromabscheidern zur Verbesserung der Leistung.<\/li>\n<li><strong>Andere Prozessbeh\u00e4lter:<\/strong> Spezielle Fest-Fl\u00fcssig-Gas-Trennzonen in ma\u00dfgeschneiderten Prozess- oder Biogassystemen.<\/li>\n<\/ul>\n<hr class=\"wp-block-separator has-alpha-channel-opacity\" \/>\n<h2 class=\"wp-block-heading\">5. Spezifikationen und Anpassungsoptionen<\/h2>\n<table class=\"spec-table\">\n<thead>\n<tr>\n<th>Artikel<\/th>\n<th>Typischer Bereich \/ Optionen<\/th>\n<th>Anmerkungen<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Material<\/td>\n<td>Polypropylen (PP)<\/td>\n<td>Andere Materialien auf Anfrage, wenn es der Prozess erfordert<\/td>\n<\/tr>\n<tr>\n<td>Reaktortypen<\/td>\n<td>UASB, EGSB, IC und kundenspezifische anaerobe Reaktoren<\/td>\n<td>Design angepasst an Reaktorgeometrie und Prozessdaten<\/td>\n<\/tr>\n<tr>\n<td>Modul Abmessungen<\/td>\n<td>Ma\u00dfgeschneidert je nach Tankdurchmesser\/L\u00e4nge und Wasserstand<\/td>\n<td>Modularer Aufbau f\u00fcr Transport und Installation<\/td>\n<\/tr>\n<tr>\n<td>Dicke der Platte<\/td>\n<td>Konzipiert auf der Grundlage der Tankgr\u00f6\u00dfe und der hydraulischen\/strukturellen Belastungen<\/td>\n<td>Verst\u00e4rkung durch Rippen und St\u00fctzen nach Bedarf<\/td>\n<\/tr>\n<tr>\n<td>Neigungswinkel<\/td>\n<td>Ma\u00dfgeschneidert f\u00fcr Schlammr\u00fcckf\u00fchrung und Trennleistung<\/td>\n<td>Endg\u00fcltiger Winkel auf der Grundlage der Prozessgestaltung und der Schlammeigenschaften<\/td>\n<\/tr>\n<tr>\n<td>Komponenten der Gassammlung<\/td>\n<td>Gashauben, Sammelkammern, Gasausl\u00e4sse<\/td>\n<td>Schnittstellen abgestimmt auf das kundenseitige Gasleitungslayout<\/td>\n<\/tr>\n<tr>\n<td>Wehre und Kan\u00e4le f\u00fcr Abw\u00e4sser<\/td>\n<td>PP-Wehrplatten, Rinnen und Abl\u00e4ufe<\/td>\n<td>Konzipiert, um die erforderliche Wehrlast und Durchflussverteilung zu erreichen<\/td>\n<\/tr>\n<tr>\n<td>Betriebstemperatur<\/td>\n<td>Typischer PP-Betriebsbereich in der anaeroben Behandlung<\/td>\n<td>Der genaue Grenzwert h\u00e4ngt von der Prozesstemperatur und dem Sicherheitsfaktor ab.<\/td>\n<\/tr>\n<tr>\n<td>Einbauverfahren<\/td>\n<td>Werkseitig vormontierte Module oder Schwei\u00dfen vor Ort<\/td>\n<td>Wahl der Option je nach Zugangsbedingungen und Tankgr\u00f6\u00dfe<\/td>\n<\/tr>\n<tr>\n<td>Dokumentation<\/td>\n<td>Allgemeine Anordnungszeichnungen und Installationsrichtlinien<\/td>\n<td>Kann mit dem Bau- und Prozessdesign des Kunden koordiniert werden<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>F\u00fcr <strong>PP-Drehstromtrenner<\/strong> Projekte, bitte geben Sie Ihre <strong>Reaktorzeichnungen, Auslegungsdurchfluss und CSB, Arbeitstemperatur, gew\u00fcnschte Schlammspiegelh\u00f6he und Abwasserqualit\u00e4tsziele<\/strong>. Wir unterst\u00fctzen Sie bei der technischen Auswahl, der detaillierten Planung und der Herstellung, um die Leistung und Zuverl\u00e4ssigkeit Ihres anaeroben Behandlungssystems zu verbessern.<\/p>","protected":false},"excerpt":{"rendered":"<p>1. Product Overview PP three-phase separators are typically installed in the upper part of anaerobic reactors. By combining deflection plates, gas collection chambers and settling zones, they separate rising gas\u2013liquid\u2013solid mixtures into three distinct phases: Gas: Biogas is collected and guided to gas piping systems, avoiding disturbance of the settling zone. Solid: Sludge particles settle [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":128,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_seopress_titles_title":"<h1 class=\"wp-block-heading\">Customized PP Three-Phase Separator \u2013 Efficient Solid\u2013Liquid\u2013Gas Separation for Wastewater Treatment<\/h1>  <p><strong>PP three-phase separators<\/strong> are key internal components installed in anaerobic reactors and other process tanks to separate solids (sludge), liquids (water) and gases (biogas or process gas). Made from corrosion-resistant polypropylene (PP), these separators help keep sludge in the reactor, collect gas efficiently and improve effluent quality, making them essential for stable operation of UASB, EGSB, IC and similar high-load wastewater treatment systems.<\/p>  <ul class=\"wp-block-list\">     <li><strong>Corrosion-resistant PP structure:<\/strong> Suitable for long-term operation in acidic, alkaline and organic wastewater environments.<\/li>     <li><strong>High separation efficiency:<\/strong> Optimized baffling and settling zones minimize sludge loss and improve outlet water quality.<\/li>     <li><strong>Lightweight modular design:<\/strong> Easy to transport, lift and install inside new or existing tanks.<\/li>     <li><strong>Custom-engineered for your reactor:<\/strong> Dimensions, slope angles, openings and connection details are designed according to your reactor layout and process data.<\/li>     <li><strong>Reduced operation cost:<\/strong> Stable separation performance supports higher loading rates and more reliable biogas recovery.<\/li> <\/ul>  <p>We offer <strong>custom PP three-phase separators<\/strong> for new anaerobic reactors and retrofit projects. Please send us your <strong>reactor type and size, wastewater characteristics (COD, flow, temperature), required separation zone height and drawings<\/strong>. Our engineering team will help you optimize the separator design and provide fabrication and installation support.<\/p>  <hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>  <h2 class=\"wp-block-heading\">1. Product Overview<\/h2>  <p><strong>PP three-phase separators<\/strong> are typically installed in the upper part of anaerobic reactors. By combining deflection plates, gas collection chambers and settling zones, they separate rising gas\u2013liquid\u2013solid mixtures into three distinct phases:<\/p>  <ul class=\"wp-block-list\">     <li><strong>Gas:<\/strong> Biogas is collected and guided to gas piping systems, avoiding disturbance of the settling zone.<\/li>     <li><strong>Solid:<\/strong> Sludge particles settle back to the reactor bottom, maintaining sufficient sludge concentration.<\/li>     <li><strong>Liquid:<\/strong> Clarified water flows over weirs to downstream treatment steps.<\/li> <\/ul>  <p>The separator is fabricated from <strong>welded PP sheets and profiles<\/strong>, offering low weight, high corrosion resistance and easy on-site assembly. Modules can be pre-assembled in the factory and then lifted into place, or welded inside the tank depending on project conditions.<\/p>  <hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>  <h2 class=\"wp-block-heading\">2. Working Principle<\/h2>  <ul class=\"wp-block-list\">     <li><strong>Upward flow and mixing:<\/strong> Wastewater mixed with sludge rises from the reactor bottom as biogas is produced during anaerobic digestion.<\/li>     <li><strong>Impact on deflector plates:<\/strong> Gas\u2013liquid\u2013solid mixtures hit the PP deflector plates in the three-phase separator. Gas bubbles change direction and separate from sludge and liquid.<\/li>     <li><strong>Gas collection:<\/strong> Released gas enters the gas collection chamber and is guided out through gas pipes, maintaining stable reactor pressure.<\/li>     <li><strong>Sludge return:<\/strong> Heavier sludge particles slide along the inclined plates or walls and settle back into the sludge bed, preventing loss of active biomass.<\/li>     <li><strong>Liquid clarification:<\/strong> The liquid continues into the settling zone, where remaining suspended solids are further separated before clarified water overflows to the effluent channel.<\/li> <\/ul>  <p>By maintaining a stable separation interface, the PP three-phase separator helps ensure <strong>high biomass retention, stable COD removal and efficient biogas recovery<\/strong>.<\/p>  <hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>  <h2 class=\"wp-block-heading\">3. Key Features & Advantages<\/h2>  <h3 class=\"wp-block-heading\">Corrosion Resistance & Service Life<\/h3>  <ul class=\"wp-block-list\">     <li><strong>Chemical resistance:<\/strong> PP material tolerates a wide pH range typically encountered in anaerobic wastewater treatment.<\/li>     <li><strong>Long service life:<\/strong> No rusting or coating peeling as with metal structures, reducing maintenance frequency.<\/li>     <li><strong>Low fouling surface:<\/strong> Smooth PP surfaces reduce scaling and are easier to wash if periodic cleaning is required.<\/li> <\/ul>  <h3 class=\"wp-block-heading\">Mechanical & Structural Performance<\/h3>  <ul class=\"wp-block-list\">     <li><strong>Lightweight construction:<\/strong> Lower self-weight compared to steel internals, simplifying lifting and installation.<\/li>     <li><strong>Reinforced design:<\/strong> Internal ribs and stiffeners can be added according to tank size and hydraulic load.<\/li>     <li><strong>Modular assembly:<\/strong> Separator modules can be transported in sections and welded together inside the reactor if access is limited.<\/li> <\/ul>  <h3 class=\"wp-block-heading\">Process Performance<\/h3>  <ul class=\"wp-block-list\">     <li><strong>High sludge retention:<\/strong> Reduces wash-out of active biomass and supports higher volumetric loading rates.<\/li>     <li><strong>Improved effluent quality:<\/strong> Enhanced solid\u2013liquid separation reduces suspended solids in the final effluent of the reactor.<\/li>     <li><strong>Stable gas collection:<\/strong> Effective gas\u2013liquid separation helps stabilize reactor pressure and protects downstream gas equipment.<\/li> <\/ul>  <hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>  <h2 class=\"wp-block-heading\">4. Typical Applications<\/h2>  <ul class=\"wp-block-list\">     <li><strong>UASB reactors:<\/strong> Upflow Anaerobic Sludge Blanket reactors for high-strength industrial wastewater.<\/li>     <li><strong>EGSB reactors:<\/strong> Expanded Granular Sludge Bed reactors with higher upflow velocities and loading rates.<\/li>     <li><strong>IC reactors and similar designs:<\/strong> Internal circulation anaerobic reactors used in compact, high-rate treatment systems.<\/li>     <li><strong>Retrofit of existing tanks:<\/strong> Upgrading older reactors or tanks by adding PP three-phase separators to improve performance.<\/li>     <li><strong>Other process vessels:<\/strong> Special solid\u2013liquid\u2013gas separation zones in custom process or biogas systems.<\/li> <\/ul>  <hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>  <h2 class=\"wp-block-heading\">5. Specifications & Customization Options<\/h2>  <table class=\"spec-table\">     <thead>         <tr>             <th>Item<\/th>             <th>Typical Range \/ Options<\/th>             <th>Notes<\/th>         <\/tr>     <\/thead>     <tbody>         <tr>             <td>Material<\/td>             <td>Polypropylene (PP)<\/td>             <td>Other materials on request if required by process<\/td>         <\/tr>         <tr>             <td>Reactor Types<\/td>             <td>UASB, EGSB, IC and custom anaerobic reactors<\/td>             <td>Design adapted to reactor geometry and process data<\/td>         <\/tr>         <tr>             <td>Module Dimensions<\/td>             <td>Customized according to tank diameter\/length and water level<\/td>             <td>Modular design for transport and installation<\/td>         <\/tr>         <tr>             <td>Plate Thickness<\/td>             <td>Designed based on tank size and hydraulic\/structural loads<\/td>             <td>Reinforced with ribs and supports as needed<\/td>         <\/tr>         <tr>             <td>Inclination Angles<\/td>             <td>Customized for sludge return and separation performance<\/td>             <td>Final angle based on process design and sludge properties<\/td>         <\/tr>         <tr>             <td>Gas Collection Components<\/td>             <td>Gas hoods, collection chambers, gas outlets<\/td>             <td>Interfaces matched to customer gas piping layout<\/td>         <\/tr>         <tr>             <td>Effluent Weirs & Channels<\/td>             <td>PP weir plates, launders and outlets<\/td>             <td>Designed to achieve required weir load and flow distribution<\/td>         <\/tr>         <tr>             <td>Service Temperature<\/td>             <td>Typical PP operating range in anaerobic treatment<\/td>             <td>Exact limit depends on process temperature and safety factor<\/td>         <\/tr>         <tr>             <td>Installation Method<\/td>             <td>Factory-preassembled modules or on-site welding<\/td>             <td>Option chosen according to access conditions and tank size<\/td>         <\/tr>         <tr>             <td>Documentation<\/td>             <td>General arrangement drawings and installation guidelines<\/td>             <td>Can be coordinated with customer\u2019s civil and process design<\/td>         <\/tr>     <\/tbody> <\/table>  <p>For <strong>PP three-phase separator<\/strong> projects, please provide your <strong>reactor drawings, design flow and COD, working temperature, desired sludge blanket height and effluent quality targets<\/strong>. We will support you with technical selection, detailed design and fabrication to help improve the performance and reliability of your anaerobic treatment system.<\/p>","_seopress_titles_desc":"Customized PP three-phase separators for UASB, EGSB, IC and other anaerobic reactors, providing efficient solid\u2013liquid\u2013gas separation, high sludge retention and stable biogas collection. Corrosion-resistant polypropylene construction, modular design and tailor-made dimensions according to your reactor drawings and process data.","_seopress_robots_index":"","_seopress_robots_follow":"","_seopress_robots_imageindex":"","_seopress_robots_snippet":"","_seopress_robots_primary_cat":"","_seopress_robots_breadcrumbs":"","_seopress_robots_freeze_modified_date":"","_seopress_robots_custom_modified_date":"","_seopress_robots_canonical":"","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_fb_img":"","_seopress_social_fb_img_attachment_id":0,"_seopress_social_fb_img_width":0,"_seopress_social_fb_img_height":0,"_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_seopress_social_twitter_img":"","_seopress_social_twitter_img_attachment_id":0,"_seopress_social_twitter_img_width":0,"_seopress_social_twitter_img_height":0,"_seopress_redirections_value":"","_seopress_redirections_enabled":"","_seopress_redirections_enabled_regex":"","_seopress_redirections_logged_status":"","_seopress_redirections_param":"","_seopress_redirections_type":0,"_seopress_analysis_target_kw":"","footnotes":""},"categories":[5],"tags":[],"class_list":["post-127","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-pp"],"_links":{"self":[{"href":"https:\/\/shengliangplastic.com\/de\/wp-json\/wp\/v2\/posts\/127","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/shengliangplastic.com\/de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/shengliangplastic.com\/de\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/shengliangplastic.com\/de\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/shengliangplastic.com\/de\/wp-json\/wp\/v2\/comments?post=127"}],"version-history":[{"count":3,"href":"https:\/\/shengliangplastic.com\/de\/wp-json\/wp\/v2\/posts\/127\/revisions"}],"predecessor-version":[{"id":493,"href":"https:\/\/shengliangplastic.com\/de\/wp-json\/wp\/v2\/posts\/127\/revisions\/493"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/shengliangplastic.com\/de\/wp-json\/wp\/v2\/media\/128"}],"wp:attachment":[{"href":"https:\/\/shengliangplastic.com\/de\/wp-json\/wp\/v2\/media?parent=127"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/shengliangplastic.com\/de\/wp-json\/wp\/v2\/categories?post=127"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/shengliangplastic.com\/de\/wp-json\/wp\/v2\/tags?post=127"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}